Multi-station cold heading machine is a highly automated industrial equipment that realizes efficient metal forming through cold heading process. It is mainly used to produce fasteners such as bolts and nuts and complex hardware parts. What are the speed control skills of multi-station cold heading machine? The following content will answer your questions.
The belt drive of multi-station cold heading machine is the main transmission mode of cold heading machine. Therefore, adjusting the belt tension is the first step of cold heading machine speed control. First, it is necessary to check whether the belt is too loose or too tight. If the tension is appropriate, the tension nut needs to be adjusted so that the belt does not slip during the transmission process.
The main drive of the multi-station cold heading machine consists of a motor, a coupling, a drive shaft and a main drive gear. Therefore, adjusting the matching degree of the main drive gear can also achieve the speed control of the cold heading machine. Specifically, it is necessary to check whether the matching degree between the main drive gear and the transmission shaft is reasonable. If the gap between the gears is too large, it is necessary to adjust the gear end face, inclination angle and meshing angle and other parameters to make the gears fit more closely.
The reducer is one of the key components of the cold heading machine. It can convert the high-speed rotation of the motor into a low-speed rotation suitable for the speed of the cold heading machine. Therefore, adjusting the gear clearance of the reducer is also one of the key steps in the speed regulation of the cold heading machine. Specifically, it is necessary to check whether the gear clearance of the reducer is reasonable. If the clearance is too large, it is necessary to adjust the gear position, inclination angle and meshing angle and other parameters to make the gears fit more closely.
